CSMS Message: 16-000648

Initiation of Antidumping and Countervailing Duty Investigations: Finished Carbon Steel Flanges from India, Italy, and Spain

On July 20, 2016, the Department of Commerce (Commerce) initiated its less-than-fair-value investigation on “Finished Carbon Steel Flanges from India, Italy, and Spain” and a countervailing duty investigation on “Finished Carbon Steel Flanges from India” (Initiation Notices). These investigations have been assigned the following case numbers: A-533-871 and C-533-872 (India), A-475-835 (Italy) and A-469-815 (Spain).

The Scope of Merchandise covered by these investigations reads as follows:

The scope of this investigation covers finished carbon steel flanges. Finished carbon steel flanges differ from unfinished carbon steel flanges (also known as carbon steel flange forgings) in that they have undergone further processing after forging, including, but not limited to, beveling, bore threading, center or step boring, face machining, taper boring, machining ends or surfaces, drilling bolt holes, and/or de-burring or shot blasting. Any one of these post-forging processes suffices to render the forging into a finished carbon steel flange for purposes of this investigation. However, mere heat treatment of a carbon steel flange forging (without any other further processing after forging) does not render the forging into a finished carbon steel flange for purposes of this investigation.

While these finished carbon steel flanges are generally manufactured to specification ASME 816.5 or ASME 816.47 series A or series 8, the scope is not limited to flanges produced under those specifications. All types of finished carbon steel flanges are included in the scope regardless of pipe size (which may or may not be expressed in inches of nominal pipe size), pressure class (usually, but not necessarily, expressed in pounds of pressure, e.g., 150, 300, 400, 600, 900, 1500, 2500, etc.), type of face (e.g., flat face, full face, raised face, etc.), configuration (e.g., weld neck, slip on, socket weld, lap joint, threaded, etc.), wall thickness (usually, but not necessarily, expressed in inches), normalization, or whether or not heat treated. These carbon steel flanges either meet or exceed the requirements of the ASTM A105, ASTM A694, ASTM A181, ASTM A350 and ASTM A707 standards (or comparable foreign specifications). The scope includes any flanges produced to the above-referenced ASTM standards as currently stated or as may be amended. The term “carbon steel” under this scope is steel in which:

(a) iron predominates, by weight, over each of the other contained elements:

(b) the carbon content is 2 percent or less, by weight; and

(c) none of the elements listed below exceeds the quantity, by weight, as indicated:

(i) 0.87 percent of aluminum;
(ii) 0.0105 percent of boron;
(iii) 10.10 percent of chromium;
(iv) 1.55 percent of columbium;
(v) 3.10 percent of copper;
(vi) 0.38 percent of lead;
(vii) 3.04 percent of manganese;
(viii) 2.05 percent of molybdenum;
(ix) 20.15 percent of nickel;
(x) 1.55 percent of niobium;
(xi) 0.20 percent of nitrogen;
(xii) 0.21 percent of phosphorus;
(xiii) 3.10 percent of silicon;
(xiv) 0.21 percent of sulfur;
(xv) 1.05 percent of titanium;
(xvi) 4.06 percent of tungsten;
(xvii) 0.53 percent of vanadium; or
(xviii) 0.015 percent of zirconium.
Finished carbon steel flanges are currently classified under subheadings 7307.91.5010 and 7307.91.5050 of the Harmonized Tariff Schedule of the United States (HTSUS). They may also be entered under HTSUS subheadings 7307.91.5030 and 7307.91.5070. The HTSUS subheadings are provided for convenience and customs purposes; the written description of the scope is dispositive.

Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.

Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determination, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Daylight Time (EDT) on August 9, 2016, which is 20 calendar days from the signature date of this notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. EDT on August 19, 2016, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.

Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce's regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.

All submissions to Commerce must be filed electronically using Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance's APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.

For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:

ACCESS: Help Link
https://access.trade.gov/help.aspx

ACCESS: External User Guide https://access.trade.gov/help/ACCESS%20User%20Guide.pdf

ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf

Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf

Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf

Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html

Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.

For Further Information Contact:

AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230:

Fred Baker at (202) 482-2924 (Antidumping Duty Investigation from India);
Moses Song at (202) 482-5041 or Edythe Artman at (202) 482-3931 (Antidumping Duty Investigation from Italy);
Mark Flessner at (202) 482-6312 (Antidumping Duty Investigation from Spain);
Emily Maloof at (202) 482-5649, or Davina Friedmann at (202) 482-0698 (Countervailing Duty Investigation from India).