CSMS Message: 18-000389

On June 11, 2018, the Department of Commerce (Commerce) initiated its less-than-fair-value and countervailing duty investigations on “Steel Propane Cylinders from the People's Republic of China, Taiwan, and Thailand” (Initiation Notices). These investigations have been assigned the following case numbers: A-570-086 and C-570-087 (China); A-583-864 (Taiwan); and A-549-839 (Thailand).

The Scope of Merchandise covered by these investigations reads as follows:

The merchandise covered by these investigations is steel cylinders for compressed or liquefied propane gas (steel propane cylinders) meeting the requirements of, or produced to meet the requirements of, U.S. Department of Transportation (USDOT) Specifications 4B, 4BA, or 4BW, or Transport Canada Specification 4BM, 4BAM, or 4BWM, or United Nations pressure receptacle standard ISO 4706. The scope includes steel propane cylinders regardless of whether they have been certified to these specifications before importation. Steel propane cylinders range from 2.5 pound nominal gas capacity (approximate 6 pound water capacity and approximate 4-6 pound tare weight) to 42 pound nominal gas capacity (approximate 100 pound water capacity and approximate 28-32 pound tare weight). Steel propane cylinders have two or fewer ports and may be imported assembled or unassembled (i.e., welded or brazed before or after importation), with or without all components (including collars, valves, gauges, tanks, foot rings, and overfill prevention devices), and coated or uncoated. Also included within the scope are drawn cylinder halves, unfinished propane cylinders, collars, and foot rings for steel propane cylinders.

An “unfinished” or “unassembled” propane cylinder includes drawn cylinder halves that have not been welded into a cylinder, cylinders that have not had flanges welded into the port hole(s), cylinders that are otherwise complete but have not had collars or foot rings welded to them, otherwise complete cylinders without a valve assembly attached, and cylinders that are otherwise complete except for testing, certification, and/or marking.

These investigations also cover steel propane cylinders that meet, are produced to meet, or are certified as meeting, other U.S. or Canadian government, international, or industry standards (including, for example, American Society of Mechanical Engineers (ASME), or American National Standard Institute (ANSI)), if they also meet, are produced to meet, or are certified as meeting USDOT Specification 4B, 4BA, or 4BW, or Transport Canada Specification 4BM, 4BAM, or 4BWM, or a United Nations pressure receptacle standard ISO 4706.

Subject merchandise also includes steel propane cylinders that have been further processed in a third country, including but not limited to, attachment of collars, foot rings, or handles by welding or brazing, heat treatment, painting, testing, certification, or any other processing that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the in-scope steel propane cylinders.

Specifically excluded are seamless steel propane cylinders and propane cylinders made from stainless steel (i.e., steel containing at least 10.5 percent chromium by weight and less than 1.2 percent carbon by weight), aluminum, or composite fiber material. Composite fiber material is material consisting of the mechanical combination of two components: fiber (typically glass, carbon, or aramid (synthetic polymer)) and a matrix material (typically polymer resin, ceramic, or metallic).

The merchandise subject to these investigations is properly classified under statistical reporting numbers 7311.00.0060 and 7311.00.0090 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS statistical reporting numbers are provided for convenience and customs purposes, the written description of the merchandise is dispositive.

Requirements For Submitting Comments On The Scope Of The Investigations: Please be sure to comply with all three requirements established below.

Deadline for Submitting Comments:
As announced in the Initiation Notices, Commerce is setting aside a period for interested parties to raise issues regarding product coverage (scope). The period for scope comments is intended to provide Commerce with ample opportunity to consider all comments and to consult with parties prior to the issuance of the preliminary determinations, as appropriate. If scope comments include factual information (see 19 CFR 351.102(b)(21)), all such factual information should be limited to public information. Commerce requests that all such comments be filed by 5:00 p.m. Eastern Time (ET) on July 2, 2018, which is the next day after 20 calendar days from the signature date of the notice. Any rebuttal comments, which may include factual information, must be filed by 5:00 p.m. ET on July 11, 2018, which is 10 calendar days after the initial comments deadline. Commerce requests that any factual information the parties consider relevant to the scope of the investigations be submitted during this time period. However, if a party subsequently finds that additional factual information pertaining to the scope of the investigations may be relevant, the party may contact Commerce and request permission to submit the additional information. All such comments must be filed on the records of each of the concurrent AD and CVD investigations identified above.

Required Entry of Appearance:
Parties wishing to participate in this segment and be included on the public service list must file a letter of appearance. Section 351.103(d)(1) of Commerce's regulations states that “with the exception of a petitioner filing a petition in an investigation, to be included on the public service list for a particular segment, each interested party must file a letter of appearance.” The letter of appearance must be filed separately from any other document (with the exception of an application for APO access). Note, the letter of appearance must state how the party qualifies as an interested party (e.g., an exporter, producer, importer of the subject merchandise) and must include a point of contact, including address, telephone/fax number and email address.

All submissions to Commerce must be filed electronically using Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). An electronically-filed document must be received successfully in its entirety by the time, typically 5 p.m., and date when it is due. Documents excepted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance's APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, and stamped with the date and time of receipt by the applicable deadlines.

For your convenience, Commerce has the following resources available online to assist you in complying with these electronic filing procedures:

ACCESS: Help Link
https://access.trade.gov/help.aspx

ACCESS: External User Guide
https://access.trade.gov/help/ACCESS%20User%20Guide.pdf

ACCESS: Handbook on Electronic Filing Procedures
https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf

Federal Register notice: Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011)
http://www.gpo.gov/fdsys/pkg/FR-2011-07-06/pdf/2011-16352.pdf

Enforcement and Compliance: Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014)
http://www.gpo.gov/fdsys/pkg/FR-2014-11-20/pdf/2014-27530.pdf

Enforcement and Compliance: General Filing Requirements http://enforcement.trade.gov/filing/index.html

Required Certifications:
Please note that the following certification requirements are in effect for company / government officials as well as their representatives. In all segments of antidumping duty or countervailing duty proceedings initiated on or after August 16, 2013, parties submitting factual information must use the formats for the certifications provided at the end of the Final Rule. See Certification of Factual Information to Import Administration During Antidumping and Countervailing Duty Proceedings, 78 FR 42678 (July 17, 2013) (Final Rule). See also the frequently asked questions regarding the Final Rule, available at http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.

For Further Information Contact:
AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue, NW, Washington, DC 20230:

For AD related inquiries: Alex Rosen at (202) 482-7814 (China); Laurel LaCivita at (202) 482-4243 or Paul Stolz at (202) 482-4474 (Taiwan); and Cindy Robinson at (202) 482-3797 or Stephanie Moore at (202) 482-3692 (Thailand).

For CVD related inquiries: Samuel Brummitt at (202) 482-7851.